Transition-networks SSETF10XX-200 Bedienungsanleitung PDF herunterladen

USER’S GUIDE

SSETF10xx-200

Stand-Alone Media Converter

• Ethernet™ and Fast Ethernet™

• 10Base-T / 100Base-TX to

10Base-FL / Base-SX

TRANSITION Networks SSETF10xx-200

series Ethernet™ and Fast Ethernet™

Media Converters connect 10Base-T or

100Base TX shielded or unshielded

twisted-pair copper cable to 10Base-FL or

100Base-SX fiber-optic cable.

* Typical maximum cable distance. (Actual distance is dependent upon the

physical characteristics of the network installation.)

Optional Accessories (sold separately)

Installation . . . . . . . . . . . . . . . . . .3

Operation . . . . . . . . . . . . . . . . . . .4

Cable Specifications . . . . . . . . . . .5

Technical Specifications . . . . . . . .6

Half-Duplex Network . . . . . . . . . .7

Fault Isolation and Correction . . .8

Compliance Information . . . . . . .11

Part Number Port One - Copper

10Base-T/100Base-TX

Port Two - Fiber-Optic

10Base-FL/100Base-SX

SSETF1011-200 RJ-45

100 m (328 ft)*

ST, 850 nm multimode

2 km (1.2 mi)* @ 10 Mb/s

300 m (980 ft)* @ 100 Mb/s

SSETF1013-200 RJ-45

100 m (328 ft)*

SC, 850 nm multimode

2 km (1.2 mi)* @ 10 Mb/s

300 m (980 ft)* @ 100 Mb/s

Part Number Description

E-MCR-03 12-Slot Media Converter Rack (includes universal internal power

supply) 17 x 15 x 5 in. (432 x 381 x 127 mm)

WMBP Optional Wall Mount Brackets

Length: 5.0 in (127 mm) Fits converter length: 4.716 in. (120 m)

SPS-1872-SA Optional External Power Supply; 18-72VDC Stand-Alone Wide-

Input; Output: 12.6VDC, 1.0 A

SPS-1872-PS Optional External Power Supply; 18-72VDC Piggy-Back Wide-

Input; Output: 12.6VDC, 1.0 A

SSETF10xx-200

Tech Su

ort: 800-260-1312 International: 952-941-7600 7am-6

m CST

(

GMT-6:00

)

Product Features

Full-Duplex / Half-Duplex

The SSETF10xx-200 receives and transmits network signals in either full-

duplex or half-duplex mode (depending upon the network devices to which

the Media Converter is attached).

Fast Ethernet™ in full-duplex mode allows the maximum cable distances

listed on page 1.

Fast Ethernet™ in half-duplex mode requires attention to the 512-bit Rule

(See page 7).

LinkAlert

The SSETF10xx-200 series Media Converter LinkAlert™ feature allows the

Media Converter to pass 10Base-T/100Base-TX-side link faults over the link to

the 10Base-T/100Base-SX side and to pass 10Base-FL/100Base-SX-side link

faults over the link to the 10Base-FL/100Base-TX side.

If the SSETF10xx-200 Media Converter does not detect a good link on the

10Base-T/100Base-TX side, the Media Converter disables all transmission

(including active-idle) on the 10Base-FL/100Base-SX side.

AutoCross*

The AutoCross™ feature allows either straight-through (MDI) or crossover

(MDI-X) cables to be used when connecting to 10Base-T or to 100Base-TX

devices, such as hubs, transceivers, or network interface cards (NICs).

AutoCross determines the characteristics of the cable connection and

automatically configures the unit to link up, regardless of the cable

configuration.

Auto-Negotiation*

The SSETF10xx-200 series Media Converter Auto-Negotiation™ feature

allows the Media Converter to be used with 10Base-T, 100Base-TX, 10Base-

FL and 100Base-SX ports. Using Auto-Negotiation, the Media Converter brings

up the copper and fiber links in the highest speed and mode possible for all

the attached network devices.

NOTE: The SSETF10xx-200 series Media Converter does NOT support rate

conversion between 10Mb/s and 100Mb/s network devices.

*Requires no operator intervention.

10Base-T or

100Bas-TX

Device

Media Converter

LINK FAULT INDICATION

10Base-FL or

100Base-SX

Device

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - USER’S GUIDE

USER’S GUIDESSETF10xx-200 Stand-Alone Media Converter• Ethernet™ and Fast Ethernet™• 10Base-T / 100Base-TX to10Base-FL / Base-SXTRANSITION Networks SS

Seite 2 - OPERATION

[email protected] -- Select the “Transition Now” Link for a Live Web Chat3INSTALLATIONInstalling the Cable FIBER1. Locate or build 10Base-FL

Seite 3 - TECHNICAL SPECIFICATIONS

[email protected] -- Select the “Transition Now” Link for a Live Web Chat5CABLE SPECIFICATIONSThe physical characteristics must meet or excee

Seite 4 - HALF-DUPLEX NETWORK

[email protected] -- Select the “Transition Now” Link for a Live Web Chat7HALF-DUPLEX NETWORK512-Bit RuleIn a half-duplex network, the maximu

Seite 5 - CONTACT US

9 [email protected] -- Select the “Transition Now” Link for a Live Web Chat5. Is the RXC LED flashing?NO• If there is no activity on the 10Ba

Seite 6 - COMPLIANCE INFORMATION

[email protected] -- Select the “Transition Now” Link for a Live Web Chat11COMPLIANCE INFORMATIONUL Listed C-UL Listed (Canada)CISPR22/EN5502

Kommentare zu diesen Handbüchern

Keine Kommentare

Transition-networks SSETF10XX-200 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Transition-networks SSETF10XX-200 herunter. Transition Networks SSETF10XX-200 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Transition-networks SSETF10XX-200