Transition Networks SM24-100SFP-AH Bedienungsanleitung PDF herunterladen (Seite 30)

3-2

Installing the Switch

Optional Rack-Mounting Equipment

If you plan to rack-mount the switch, be sure to have the following equipment

available:

• Four mounting screws for each device you plan to install in a rack—these are not

included

• A screwdriver (Phillips or flathead, depending on the type of screws used)

Mounting

The switch units can be mounted in a standard 19-inch equipment rack or on a

desktop or shelf. Mounting instructions for each type of site follow.

Rack Mounting

Before rack mounting the switch, pay particular attention to the following factors:

• Temperature: Since the temperature within a rack assembly may be higher than

the ambient room temperature, check that the rack-environment temperature is

within the specified operating temperature range. (See page D-2.)

• Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.

• Circuit Overloading: Be sure that the supply circuit to the rack assembly is not

overloaded.

• Grounding: Rack-mounted equipment should be properly grounded. Particular

attention should be given to supply connections other than direct connections to

the mains.

To rack-mount devices:

1. Attach the brackets to the device using the screws provided in the Bracket

Mounting Kit.

Figure 3-1. Attaching the Brackets

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Keine Kommentare

Transition Networks SM24-100SFP-AH Bedienungsanleitung Seite 30